Toyota Techstream Add Key

Posted : admin | On 23-04-2021



This show a guide on how to use Toyota TIS Techstream to program a new key for Toyota Camry.And you also can program Toyota Camry manually,check this article:Program New Key for Toyota Camry & Solara Manually.But here i recommend you to use this Techstream to do it,it is very convenient,and Toyota TIS Techstream also a diagnostic cable of your Camry.

Preparations:

Thank you for your interest in the Toyota / Lexus Technical Information system (TIS). TIS subscriptions provide access to all the product support information necessary to maintain, diagnose, repair, and reprogram vehicles manufactured by Toyota and marketed in North America.

Procedures:

Connect your Techstream cable to vehicle obd port under the steering wheel.

When i run vxdiag vcx nano Toyota software v12, Techstream asked to enter a activation key. Where can i get the registration key? How to activate VXDIAG Toyota Techstream? For example: TIS version 12.0.0.127. Install Techstream 12.00.127. Open techstream and select area and then close. Copy mainmenu.exe to techstream/bin folder. TS Lite PRO Kit Installation Instructions – Rev 3.4 4. Enter a Computer Name and a Shop/Owner Name, then click Calculate Key. Copy the Key from the Techinfo website. Return to the Register Techstream Software screen and paste the Key in the New Key field. Click OK to register. Note: The Register Techstream.

Use your original master key to turn the ignition to “ON” position

Run Techstream software

Toyota Techstream software, free download

After vehicle identification,select “Immobiliser”

Click “Utility” button at left side menu,then select “Key Registration”

Then press “Next” to proceed

Now Techstream will show you the steps to program new keys:

Step 1:

Remove the key from the Key Cylinder

Insert the key back into the Key Cylinder

Turn IG ON

After then click “Next” to continue

Step 2:

Remove the master key from the key cylinder within 20 seconds,then press Next.

Step 3:

Insert the key you want to program within 10 seconds,then press next.

<CAUTION>:DO NOT TURN THE IGNITION SWITCH ON

Now it need take a few minutes to complete the progress,please wait…

Techstream Key Generator

After the process completing,it will show the key registration is complete.

This key should now start the vehicle.

Press “Next” to register another key or press Exit to exit the key registration wizard

Now you can the new key on your Camry by using security light for immobilizer system.If keys can not work the security light will be blinking constantly,and if inserted key is registered key,the security light will disappear.And the you can take the key to your local locksmith store to cut the key.

Program Remote Buttons:

Back to “Main Body”

Select “Utility” button,then select “Wireless Code Registration”

Then it will ask you to perform below operations:

1.Ignition is ON

2.Driver side door is opened and other doors are closed

3.Driver side door is unlocked

After the click “Next” to continue

Note:The registration process will fail if the time limit is exceeded for any step

Toyota Techstream Add Keychain

Remaining number of remotes that can be registered,here in the example number of remotes currently registered is 2,click “Next”

On the next screen,you will have to perform the following operations within 30 seconds.

Toyota techstream add key westKey

On the remote transmitter,push:

Toyota Techstream Add Key West

1.Lock and Unlock simultaneously for 1 second.

2.Within 3 seconds,press either the LOCK or UNLOCK button again for 1 second

On the remote transmitter,push:

Techstream Software Key Generator

1.Lock and Unlock simultaneously for 1 second.

2.Within 3 seconds,press either the LOCK or UNLOCK button again for 1 second

Wireless Code Registration is complete

Press Next to register another key code,or press Exit to exit this function

Now test the remote function on your Toyota Camry.

Toyota Techstream Download Windows 10

Readers who read this article also read: